MPC 1000

“You are bidding on a mpc1000 beat maker.i had it for a year and only used it to try it out.never could figure it out so it’s been sitting ever since.all the bottons are there and in working condition.it comes with the power cord and the card u see in the picture” Click here to search for MPCs on eBay

“We got this out of a storage unit. Turns on but otherwise untested. 16mb installed, JJ OS VERSION 3.15. No sounds included.

Missing the covers for the Q1 and Q2 sliders. The “stop” button is a little loose, and several of the pads (1,9,10,11,13,15) feels sunken in and may not work. Unable to test it.” Click here to search for MPCs on eBay

” Akai MPC 1000 sequencer,sampler in good condition This Akai MPC 1000 sequencer, sampler is in good condition.This item functions and works perfect without any sorts of flaws. It also in good condition cosmetically, with just a few small scratches as you would expect on a such a unit. Power cable included with the unit. No manual is included but can be easily found online. Thanks” Click here to search for MPCs on eBay

“Up for sale is the phenomenal MPC 1000. Recently upgraded pads and a 80gb hard drive with samples for over 20 classic drum machines. Light scuff marks from normal ware and tear. JJos1 Version 4.99 operating system power cord included.

This unit has served me well and I’m only selling because I am upgrading to the MPC Live” Click here to search for MPCs on eBay

” AKAI MPC 1000 So gut wie nie gebraucht. Das Gerät funktioniert einwandfrei. Ich verkaufe als Privatperson – keine Garantie oder Rücknahme.” Click here to search for MPCs on eBay

“Mpc 1000 maximum memory (128MB) a built in HDD JJ os2xl and an official akai MPC1000 gig bag. Good working condition.” Click here to search for MPCs on eBay

”
excellent condition. pads work wonderfully and feel great with the upgrades.

upgrades installed:
mpcstuff pad fix upgrade
black metal front panel and black knobs, jog wheel, memory slot, buttons, etc.
knurled volume & record knobs
polished walnut side panels
XLCD screen (white)
right side pcb with upgraded jog wheel encoder
256mb ram upgrade
JJOS 128XL (128SP currently installed)

notes:

the right side wood panel is ever so slightly loose. you won’t notice it unless you’re holding it by the sides.

the custom knurled vol/rec knobs have to be set at just the right height to not rub. i adjusted them and they are smooth.

after replacing the right side pcb i noticed that the “16 levels” button doesn’t have quite as much travel as the others. it still makes a “click” when you press it and is totally functional. just feels a little different. i’m guessing the button cap needs to be shifted slightly, but i didn’t want to open it back up as it works fine.

the compact flash card slot has a bit of friction when you try to eject the card. it still comes out, but it takes a sec.

i cut a small sheet of corrective orange lighting gel and put it on the XLCD because it is very bright! it’s non-permanent and easy to remove.” Click here to search for MPCs on eBay

“Carefully inspected and tested

Good working condition

Kits, Beatbox samples, percussion, loops, bass, keyboards and strings as well as the default internal kit.

You will receive item as it is pictured!” Click here to search for MPCs on eBay

“Everything works just fine!” Click here to search for MPCs on eBay

“This is an Akai MPC 1000 in overall good condition and ALL functions work properly. However, there are a few caveats: The “Pad Bank A” button is missing (recently broke) and will need to be replaced, and there are a couple of buttons (Pad bank B and C, full level, mode, and window) that occasionally need a few presses to register on the unit. I am not exactly sure the reason behind this, as the actual buttons and switches are fully in tact physically. It is possible that the sensors or electronics may need to be cleaned (many MPC users have had success with using “DeOxit” to fix conductivity issues with their machines), however I do not have the desire to undergo the procedures myself. Thankfully, parts for this machine are easy to find online and thus with a little patience this MPC can be up and running as if it were new. Aside from these quirks, The machine itself has just a few scratches and no significant cosmetic damage (see pictures). JJOS2XL already comes preloaded with the option to also boot into JJOS3. The RAM has been upgraded to 128 MB. The original pads (included) have been upgraded to black thick fat pads from mpcstuff.com, and it also has the new style pad sensor sheet installed. Most of the buttons, wheels, and knobs have also been replaced by black versions for a monochrome color scheme. In addition, this unit comes with the original box, power cable, and a 32 GB CF card. I am selling this MPC for financial reasons and I hope to find a good new home and owner for it!” Click here to search for MPCs on eBay