“Maxxed out AKAI MPC 3000 w/ Microtech Dual CF drive (hot swappable), Max RAM, OS 3.5
Upgraded with a Microtech dual Compact Flash drive – the best upgrade drive for a 3000 and impossible to find now. Load two CF cards at once, switch between them easily, and of course this drive is HOT SWAPPABLE, so you can change cards to your heart’s content without powering off, unlike a lot of cheaper CF drives people have installed in 3000s.
Upgraded to Vailixi OS; upgraded to max RAM (32MB).
Details: Microtech drive uses PCMCIA to CF adapter cards to read the CF cards you will use for storage – both adapter cards are included (seen in photo of drive).
Issues: -The “Locate”/’W’ key sensor isn’t working most of the time – not really a problem, the Locate function isn’t necessary and I just used ‘V’ in place of ‘W’ when naming files. To me this was a non-issue.
-After long operation with LCD backlight on, LCD screen will generate a faint hum, which is resolved by turning off the LCD backlight (by pressing the LCD contrast adjustment dial to toggle the backlight on/off). Probably a result of heat accumulation in the screen and probably an easy fix by moving a wire away from the housing in the screen if you are so inclined – wasn’t enough of an issue for me to even do this.
-Very small piece broken off of the underside of the lower right corner of the plastic sidebar (pictured). You don’t see this from the top, only noticeable if looking at it straight-on from the front edge or underside. Otherwise very little cosmetic damage – a couple small paint chips, the usual fingernail chips in the paint around Soft Key 1 – overall a clean unit, much cleaner that most 3000s I’ve seen for sale. ”
Click here to visit listing on eBay